
The Venom F5-M Roadster is a limited-edition hypercar with a 1,817 HP engine and a manual transmission. Its extreme power and performance make it a coveted choice for those seeking the ultimate driving thrill. Only 12 units were produced, making it a rare and highly sought-after collectible.
Not Available
| Vehicle Type | Car |
| Fuel | Petrol |
| Engine Details | 6.6 L Twin Turbo V8 Precision ball bearing twin turbochargers (76 mm billet aluminum compressor wheels) Valve train: Pushrod & Rocker Engine block: Cast iron Cylinder heads: Aluminum cylinder heads with canted titanium intake valves Connection rods: Forged steel Valves: Inconel exhaust valves with dual valve springs Total engine weight: 280kg (617 lbs) Power density: 277 hp/liter |
| Bore x Stroke | 104.8mm x 95.3mm |
| Compression Ratio | 10:1 |
| Engine Lubrication | Dry sump |
| Clutch | Single clutch (240mm / 9.4-inch diameter) |
| Maximum Power | 1817 hp @ 8,000 rpm (8,500 rpm F5 mode) |
| Maximum Torque | 1617.4 Nm @ 5,000 rpm (8,500 rpm F5 mode) |
| Transmission | 6-Speed Manual |
| Riding Modes | Sport, Wet, Drag, Track & F5 |
| Brakes | |
|---|---|
| Front Brake | 390 mm diameter x 34 mm carbon ceramic – bespoke 6-piston caliper |
| Rear Brake | 390 mm diameter x 34 mm carbon ceramic – bespoke 4-piston caliper |
| Chassis and Suspension | |
|---|---|
| Frame | Monocoque carbon fiber (86 kg) |
| Front Suspension | Double wishbone independent with fully adjustable coil over Penske dampers |
| Rear Suspension | Double wishbone independent with fully adjustable coil over Penske dampers |
| Tyres | |
|---|---|
| Wheels / Rim | Forged aluminum alloy Front: 19-inch x 9.5-inch Rear: 20-inch x 12-inch |
| Front Tyre | 265/35ZR19, Michelin Pilot Sport Cup 2 |
| Rear Tyre | 345/30ZR20, Michelin Pilot Sport Cup 2 |
| Dimensions | |
|---|---|
| Length | 4,666 mm |
| Width | 1960-1971 mm |
| Height | 1,131 mm |
| Wheelbase | 2,800 mm |
| Weight | 1,360 kg |
| Kerb Weight | 1,385 kg |
| Additional Details |
|---|
| Stainless steel Exhaust wheel Drag coefficient: 0.39 Cd Carbon fiber gloss (satin as an option) front splitter & rear diffusor Rack and pinion steering with electric power assistance Hubs and bearing carriers: Unitary hub with 5 studs Front/Rear track: 1,574 / 1,584 mm Carbon fiber with leather side grips steering wheel Machined aluminum pedals Ride height (adjustable) - Low: 75mm (front) 85mm (rear) - High: 140mm (front) 160mm (rear) – using HLS |